PDK81301-5*0.75 Five-Core Watertight Underwater Power Cable for Deep-Sea Equipment
Underwater Power Cables · Marine & Subsea
PDK81301-5*0.75
Five-core 0.75mm² watertight power cable with XLPE insulation and a TPU jacket, rated 10 MPa, for ROV thrusters and subsea hydraulic power units.
Product introduction
This product is a 5-core power-only watertight (submersible) cable designed for high-power underwater equipment operating in deep water, such as deep-sea ROV thrusters, subsea hydraulic power units, high-capacity pumps and offshore drilling support systems. It provides high current capacity and low voltage drop while maintaining robust watertight integrity and good resistance to dynamic flexing under severe subsea conditions. The cable carries no signal or fibre cores, which makes it a suitable choice for applications that require clean, high-current AC or DC power transmission alone under extreme hydrostatic pressure.
Model
PDK81301-5*0.75
Specification
5*0.75
Conductor material
Tinned copper
Insulation material
XLPE
Jacket material
Thermoplastic polyurethane (TPU)
Jacket outer diameter (mm)
8.5 ± 0.3 mm
Jacket colour
Green
Temperature range
-40 to +105 °C
Water pressure resistance
10 MPa
The TPU (thermoplastic polyurethane) jacket is designed for prolonged deep-sea immersion. Unlike standard elastomers, this TPU compound offers good hydrolysis resistance, resistance to cathodic disbondment and resistance to marine biofouling adhesion, while retaining excellent abrasion, cut and impact resistance. Reliable performance across a wide temperature range (-40 °C to +105 °C) ensures consistent operation from Arctic waters to tropical seas.
Well suited to:
Deep-sea ROV/AUV power tethers for high-thrust propulsion and manipulator systems
Subsea hydraulic power units (HPU) and electric actuators
High-capacity subsea pumps, compressors and blowers
Power supply for offshore drilling equipment and BOP control
Marine renewable energy — power links for tidal turbines and wave energy converters
Heavy-duty on-board power where a watertight bulkhead penetration is required
Any underwater system that needs pure three-phase or single-phase high current (up to 35A) without signal integration, in extreme marine environments and without mechanical tension requirements
The cable is intended for high-capacity three-phase power transmission under high hydrostatic pressure; signal conductors are eliminated and the overall diameter kept as small as possible to ease subsea handling. It is a common solution for marine engineering, deep-sea mining, underwater propulsion and offshore power distribution.
Related in Underwater Power Cables
Engineering enquiry