Elevator Traveling Cables
A traveling cable hangs, travels and bends in one plane for the life of the building. Flat constructions keep the bend neutral about a defined axis and stack neatly in the hoistway; integrated coax or fibre carries camera and network signals without a second cable. Core identification and flame behaviour are part of the specification, not an afterthought.
Flat constructionIntegrated coax / fibreFlame retardantCold-flexibleHoistway rated
SeriesIndustrial Automation
Products9 ref
Typical usePassenger and goods lifts
CustomisationSections, cores, screening, length, termination
Constructions
9 ref
On request
Crane and Elevator Cable Custom 2-60 Cores 600/1000V
Custom buildView →
PDK31300
PDK31300-2×6.0+STP CAT6-100KG Elevator Traveling Flat Cable
Bare copper, 0.2 mm wiresView →
32-Core Crane Pendant Cable 2.5 mm², 450/750 V, PUR Sheath
Custom buildView →
4 Core Single-Mode Fiber Elevator Traveling Cable 25×9 mm
Custom buildView →
Custom Flat Elevator Traveling Cable, 1-60 Cores, Coax and Fibre, PVC, 450/750V
Custom buildView →
Elevator Traveling Cable 2×1.0 mm² + 4×2×24AWG, 450/750 V
Custom buildView →
Elevator Traveling Cable with Coaxial 75-2 - Flat Construction, Two Steel Wires, 450/750 V
Custom buildView →
High-Voltage Crane Reel Cable, 12 Power Cores + 6 Control Pairs, 6 kV, Rubber
Custom buildView →
Hoist Control Cable 2×1.0 mm² + 4×2×24AWG, Steel Support, PVC, 300/500 V
Custom buildView →
Fits
Passenger and goods liftsService elevatorsBuilding retrofitHoistway monitoring
Engineering enquiry